276°
Posted 20 hours ago

Headrush MX5 - Guitar Amp & FX Modelling Processor with 4” Touch Display, Expression Pedal, Looper & USB Audio Interface for guitarists and bassists

£209.5£419.00Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

The 4 new Amp Models range from clean and crunchy tones to fierce metal tones. Bass players get to utilise the B DIST 7000 model inspired by the Darkglass Microtubes B7K Ultra V2 Bass Preamp. Can I turn off the amp/cab models for specific outputs or send my guitar directly to an output with no amp modeling applied at all? If an item can not be repaired, a similar alternative product or cash discount (as defined in this policy) will be offered For customers in outlying areas of the country, the price of the Extended Warranty may be marginally higher, due to the potential for higher collection and redelivery transport costs.

Yes, reverb/delay spillover can be enabled/disabled for each rig by tapping the TAIL button in the rig view.Yes. Some of our amp models include their onboard tremolo, but there is also a tremolo pedal model that can be used separately. Yes. Our 8-Bit Crush model gives you a wide variety of grimey crushing sounds. You can even individually mute or invert any of the 8-bits.

As is often the case with digital modelling, the sky is the limit when it comes to sounds, but it’s how the MX5 arranges its sounds that makes it particularly effective. The technological disruption in guitar gear does not just see analogue hardware units replaced by digital emulations, it also yields regular updates to firmware and functionality in the digital realm. When using the HeadRush, a Rig can be considered a preset. A Rig contains all of the 11 footswitch slots and their associated models (amps, cabs, and effects) and each model's parameter settings. This makes it easy to save and recall an entire signal chain at once. The HeadRush MX5 is the newest and most streamlined multi-fx module from HeadRush! This article will answer the most frequently asked questions to get you up to speed on the massive potential of the MX5! The HeadRush amp and FX library is continuously expanding. Users have spoken and the creators have listened, delivering with two new amp models, a host of new FX, the ability to assign two scenes to one footswitch, and a slew of improvements and optimisations for existing FXs and the UI. Yes, just simply tap the magnifying glass icon on the top bar of the Rig View screen and you can search through all of your presets using the QWERTY-style touch keyboard that appears. Note: If you are currently using a setlist when you tap the magnifying glass icon, you will only search within that setlist.In Classic Mode, you can assign one parameter to each expressional pedal (A and B). Using the toe switch will select the other expression pedal and deactivate (bypass) the current expression pedal’s parameter. For example, if you assign a wah pedal to Expression Pedal A and a volume pedal to Expression Pedal B, only one of them will be active at any time; when you are controlling the wah pedal, the volume pedal will be bypassed, and vice versa. Connectors: (1) ¼-Inch (6.35 Mm) Mono Input (Guitar), (1) ¼-Inch (6.35 Mm) TRS Input (Expression Pedal), (1) ¼-Inch (6.35 Mm) Stereo Output (Send), (1) ¼-Inch (6.35 Mm) Stereo Input (Return), (2) ¼-Inch (6.35 Mm) Balanced Output (Main), (1) 1/8-Inch (3.5 Mm) Stereo Output (Headphones), (1) 1/8-Inch (3.5 Mm) Stereo Input (Auxiliary Device), (1) 1/8-Inch (3.5 Mm) MIDI Output, (1) 1/8-Inch (3.5 Mm) MIDI Input, (1) USB Type-B Port, (1) DC Power Adapter Input The switches on the HeadRush MX5 are dual-purpose: holding down the switch will enter hands-free edit mode, and letting go initiates the action of the assigned pedal (on/off). This means that a model will not turn on/off until the associated pedal is released, which may differ from some standalone pedals that active/deactivate on the initial press.

Collection and delivery costs are included for the first 2 years in the event of an item becoming faulty Most standard expression pedals will work with the HeadRush MX5. We recommend the M-Audio EX-P expression pedal. The MX5 feels like a more powerful beast than the full-fat floorboard did onits original release. It’s priced competitively, and can replace several pedals on a compact ’board. For players assembling complex but static chains it might even replace a whole pedalboard.” If you connect an external expression pedal to this ¼" input, the external expression will control parameters assigned to expression pedal B. When an external expression pedal is connected, the internal expression pedal will only control parameters assigned to expression pedal A.Can I assign half of my footswitches to control models, and half of my footswitches to control rig selection at the same time? Yes, you can connect your HeadRush MX5 to your Mac or PC's USB port, then go to your global settings, and enable USB Transfer Mode. Once you're in this mode, the HeadRush MX5 will show up as a mass-storage device (like a USB drive) and you can drag and drop to easily transfer your rig presets, model presets, and setlists. The following system requirements are the minimum specifications required for using the HeadRush MX5 with your computer: The Headrush MX5 Multi-Effects processor is here to show your tone a good time. This modelling guitar effects processor has everything you need (and more) to start experimenting with your music like never before. It has a vast array of different amp models and cab simulators, so you can choose anything from a crystal-clean, sparkling clean amp to an all-our, war-ready gain machine. A host of effects models are also included, so you can add some shimmering delay and reverb, as well many other effects, to your sound. The MX5 features a convenient "hands free" edit mode which allows you to adjust any parameter mid-song without having to stop playing and bend down to make the changes.Simply select the model that you want to adjust, select the parameter, and then use the built-in expression pedal to fine-tune your settings! Simple! The expression pedal is also fully assignable within each preset and can be used as a volume or a wah wah pedal in addition to tweaking preset parameters. Record and Reamp

In Advanced Mode, you can assign up to four parameters to each expression pedal (A and B). Moving the pedal will adjust all of its assigned parameters simultaneously. Using the toe switch will select the other expression pedal and leave the current pedal’s parameters active and at their maximum values.Gapless preset-switching is an exclusive feature on the HeadRush MX5 and means that any reverb or delay-tails will continue to ring out, even after changing your preset or rig. This way there is no break in the signal, making your rig changes sound fluid and seamless. For a demonstration, see the video here. The touchscreen may be smaller than those of the larger Headrush devices but it remains easy to read and use. The HeadRush MX5 comes preloaded with 270 factory presets covering a huge variety of genres and styles. When you press this footswitch, you can "punch-in/punch-out" of a specific part of your loop and overwrite all previous layers. This is useful when you need to fix a very small part of a loop.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment